Quotation mark

‘  ’



“ ”

Punctuation

apostrophe ( ’ ' )
brackets ( [ ], ( ), { }, ⟨ ⟩ )
colon ( : )
comma ( , )
dash ( , –, —, ― )
ellipsis ( …, ... )
exclamation mark ( ! )
full stop/period ( . )
guillemets ( « » )
hyphen ( -, )
question mark ( ? )
quotation marks ( ‘ ’, “ ” )
semicolon ( ; )
slash/stroke ( / )
solidus ( )
Word dividers
space ( ) ( ) ( ) (␠) (␢) (␣)
interpunct ( · )
General typography
ampersand ( & )
at sign ( @ )
asterisk ( * )
backslash ( \ )
bullet ( )
caret ( ^ )
copyright symbol ( © )
currency (generic) ( ¤ )
currency (specific)
฿ ¢ ₡ ₢ ₠ $ Indian Rupee symbol.svg ƒ ₲ ₴ ₭ ℳ ₥ ₦ ₰ £ ₨ ₪ Kazakhstani tenge symbol.svg ₩ ¥
dagger ( †, ‡ )
degree ( ° )
ditto mark ( )
inverted exclamation mark ( ¡ )
inverted question mark ( ¿ )
number sign/pound/hash ( # )
numero sign ( )
ordinal indicator ( º, ª )
percent etc. ( %, ‰, )
pilcrow ( )
prime ( )
registered trademark ( ® )
section sign ( § )
service mark ( )
sound recording copyright ( )
tilde ( ~ )
trademark ( )
underscore/understrike ( _ )
vertical/broken bar, pipe ( |, ¦ )
Uncommon typography
asterism ( )
tee ( )
up tack ( )
index/fist ( )
therefore sign ( )
because sign ( )
interrobang ( )
irony & sarcasm punctuation ( ؟ )
lozenge ( )
reference mark ( )
tie ( )

Quotation marks or inverted commas (informally referred to as quotes[1] and speech marks) are punctuation marks used in pairs to set off speech, a quotation, a phrase, or a word. They come as a pair of opening and closing marks in either of two styles: single (‘…’) or double (“…”).

Depending on the typeface, opening and closing quotation marks may be identical in form (called “vertical”, “straight”, or “typewriter” quotation marks), or they may be distinctly left-handed and right-handed (“typographic” or, colloquially, “curly” quotation marks). The closing single quotation mark is identical or similar in form to the apostrophe, and similar to the prime symbol. These three characters have quite different purposes, however. See also ditto mark.

Contents

Usage

Quotations and speech

Single or double quotation marks denote either speech or a quotation. Neither style—single or double—is an absolute rule, though double quotation marks are preferred in the United States, and both single and double quotation marks are used in the United Kingdom. A publisher’s or author’s style may take precedence over national general preferences. The important rule is that the style of opening and closing quotation marks must be matched:

‘Good morning, Gagan,’ greeted HAL.
“Good morning, Gagan,” greeted HAL.

For speech within speech, the other is used as inner quotation marks:

‘HAL said, “Good morning, Dave,” ’ recalled Frank.
“HAL said, ‘Good morning, Dave,’ ” recalled Frank.

Sometimes, quotations are nested in more levels than inner and outer quotation. Nesting levels up to five can be found in the Bible.[2] In these cases, questions arise about the form (and names) of the quotation marks to be used. The most common way is to simply alternate between the two forms[3], thus:

“…‘…“…‘ …   … ’…”…’…”

If such a passage is further quoted in another publication, then all of their forms have to be shifted over by one level.

In most cases, quotations that span multiple paragraphs should be set as block quotations, and thus do not require quotation marks. Quotation marks are used for multiple-paragraph quotations in some cases, especially in narratives. The convention in English is to give opening quotation marks to the first and each subsequent paragraph, using closing quotation marks only for the final paragraph of the quotation, as in the following example from Pride and Prejudice:

The letter was to this effect:

“My dear Lizzy,

“I wish you joy. If you love Mr. Darcy half as well as I do my dear Wickham, you must be very happy. It is a great comfort to have you so rich, and when you have nothing else to do, I hope you will think of us. I am sure Wickham would like a place at court very much, and I do not think we shall have quite money enough to live upon without some help. Any place would do, of about three or four hundred a year; but however, do not speak to Mr. Darcy about it, if you had rather not.

“Yours, etc.”

As noted below, in some older texts, the quotation mark is repeated every line, rather than every paragraph. The Spanish convention uses closing quotation marks at the beginning of all subsequent paragraphs beyond the first.

When quoted text is interrupted, such as with the phrase he said, a closing quotation mark is used before the interruption, and an opening quotation mark after. Commas are also often used before and after the interruption, more often for quotations of speech than for quotations of text:

“HAL,” noted Frank, “said that everything was going extremely well.”

It is incorrect to use quotation marks for paraphrased speech. This is because a paraphrase is not a direct quote, and in the course of any composition, it is important to document when one is using a quotation versus when one is using a paraphrased idea.

If HAL says: “All systems are functional,” then:

Incorrect: HAL said that “Everything was going extremely well.”
Correct: HAL said that everything was going extremely well.

However, another convention when quoting text in the body of a paragraph or sentence—for example, in an essay—is to recognize double quotation marks as marking an exact quotation, and single quotation marks as marking a paraphrased quotation or a quotation where grammar, pronouns, or plurality have been changed in order to fit the sentence containing the quotation (see reported speech).

Irony

Another common use of quotation marks is to indicate or call attention to ironic or apologetic words:

He shared his “wisdom” with me.
The lunch lady plopped a glob of “food” onto my tray.
She attempted to use her “strength” to lift the weight.

To avoid the potential for confusion between ironic quotes and direct quotations, some style guides specify single quotation marks for this usage, and double quotation marks for verbatim speech. Quotes indicating irony, or other special use, are sometimes called scare, sneer, shock, distance, or horror quotes. They are sometimes gestured in oral speech using air quotes.

Signaling unusual usage

Quotation marks are also used to indicate that the writer realizes that a word is not being used in its current commonly accepted sense.

Crystals somehow “know” which shape to grow into.

In addition to conveying a neutral attitude and to call attention to a neologism, or slang, or special terminology (also known as jargon), quoting can also indicate words or phrases that are descriptive but unusual, colloquial, folksy, startling, humorous, metaphoric, or contain a pun:

Dawkins’s concept of a meme could be described as an “evolving idea.”

People also use quotation marks in this way to:

The Chicago Manual of Style (CMS), 15th edition[4] acknowledges this type of use but cautions against overuse in section 7.58, “Quotation marks are often used to alert readers that a term is used in a nonstandard, ironic, or other special sense […] They imply ‘This is not my term,’ or ‘This is not how the term is usually applied.’ Like any such device, scare quotes lose their force and irritate readers if overused.”

Use–mention distinction

Either quotation marks or italic type can emphasize that an instance of a word refers to the word itself rather than its associated concept.

Cheese is derived from milk.
“Cheese” is derived from a word in Old English.
Cheese has calcium, protein, and phosphorus.
Cheese has three es.

A three-way distinction is occasionally made between normal use of a word (no quotation marks), referring to the concept behind the word (single quotation marks), and the word itself (double quotation marks):

When discussing ‘use’, use “use”.

The logic for this derives from the need to distinguish use forms, coupled with the mandate to retain consistent notation for like use forms.[5] The switching between double and single quotes in nested citation quotes reveals the same literary device for reducing ambiguitiy.

Books about language often use italics for the word itself and single quotation marks for a gloss:

The French word canif ‘pocketknife’ is borrowed from Old English cnif ‘knife’.

In common usage, there may be a distinction between the single and double quotation marks in this context; often, single quotation marks are used to embrace single characters, while double quotation marks enclose whole words or phrases:

The two may, however, in these cases, be to some degree interchangeable.

Titles of artistic works

Quotation marks, rather than italics, are generally used for the titles of shorter works. Whether these are single or double is again a matter of style; however, many styles, especially for poetry, prefer the use of single quotation marks.

As a rule, a whole publication would be italicised, whereas the titles of minor works (such as poems or short stories inside the collection) would be written with quotation marks.

Nicknames and false titles

Quotation marks can also offset a nickname embedded in an actual name, or a false or ironic title embedded in an actual title; for example, Nat “King” Cole, Miles “Tails” Prower, or John “Hannibal” Smith.

Emphasis (incorrect usage)

Quotes are sometimes used incorrectly for emphasis in lieu of underlining or italics, most commonly on signs or placards. This usage can be confused with ironic or altered-usage quotation, sometimes with unintended humor. For example, For sale: “fresh” fish, “fresh” oysters, could be construed to imply that fresh is not used with its everyday meaning, or indeed to indicate that the fish or oysters are anything but fresh. And again, Cashiers’ desks open until noon for your “convenience” might mean that the convenience was for the bank employees, not the customers.[6][7][8][9]

Typographical considerations

Punctuation

With regard to quotation marks adjacent to periods and commas, there are two styles of punctuation in widespread use. While these two styles are most commonly referred to as “American” and “British” (and some style sheets provide no other name), some American writers and organizations use the “British” style and vice versa. Both systems have the same rules regarding question marks, exclamation points, colons and semicolons. They differ on the treatment of periods and commas.

In the U.S., the standard style is called American style, typesetters’ rules, printers’ rules, typographical usage, or traditional punctuation, whereby commas and periods are almost always placed inside closing quotation marks.[10] This style of punctuation is common in the U.S., Canada, and in the U.K. in fiction and journalism.[11]

The other standard style—called British style or logical punctuation[12]—is to include within quotation marks only those punctuation marks that appeared in the quoted material, but otherwise to place punctuation outside the closing quotation marks.

Examples

When dealing with words-as-words, short-form works and sentence fragments, the styles differ:

When dealing with direct speech, American rules place periods and commas inside the quotation marks all the time, but the alternative usage varies. In fiction, both styles are the same.[13] In non-fiction, British publishers may permit placing punctuation that is not part of the person’s speech inside the quotation marks but prefer that it be placed outside.[13] According to the Cambridge Handbook for Editors, Copy-editors and Proofreaders, periods and commas that are part of the person’s speech are permitted inside the quotation marks regardless.[13]

Many American style guides explicitly permit periods and commas outside the quotation marks when the presence of the punctuation mark inside the quotation marks will lead to ambiguity, such as when describing keyboard input:

In all major forms of English, question marks and exclamation marks are placed inside or outside quoted material depending on whether they apply to the whole sentence or just the quoted portion, but colons and semicolons are always placed outside.[14]

In the first two sentences above, only one punctuation mark is used at the end of each. Regardless of its placement, only one end mark (?, !, or .) can end a sentence in American English. Only the period, however, cannot end a quoted sentence when it does not also end the enclosing sentence, except for literal text:

References: Chicago Manual of Style, 15th edition; Hart's Rules for Compositors and Readers at the University Press, Oxford; Merriam-Webster's Guide to Punctuation and Style, second edition.

Spacing

In English, when a quotation follows other writing on a line of text, a space precedes the opening quotation mark unless the preceding symbol, such as a dash, requires that there be no space. When a quotation is followed by other writing on a line of text, a space follows the closing quotation mark unless it is immediately followed by other punctuation within the sentence, such as a colon or closing punctuation. (These exceptions are ignored by some Asian computer systems that systematically display quotation marks with the included spacing, as this spacing is part of the fixed-width characters.)

There is generally no space between an opening quotation mark and the following word, or a closing quotation mark and the preceding word. When a double quotation mark or a single quotation mark immediately follows the other, proper spacing for legibility requires that a non-breaking space be inserted.

So Dave actually said, “He said, ‘Good morning’ ”?
Yes, he did say, “He said, ‘Good morning.’ ”

Non-language related usage

Straight quotation marks (or italicized straight quotation marks) are often used to approximate the prime and double prime, e. g., when signifying feet and inches, arcminutes and arcseconds or minutes and seconds, where the quotation mark symbolises the latter part of the pair. For instance, 5 feet and 6 inches is often written 5' 6", and 40 degrees, 20 arcminutes, and 50 arcseconds is written 40° 20' 50". When available, however, the prime should be used instead (e. g., 5′ 6″, and 40° 20′ 50″). Prime and double prime are not present in most character sets, including ASCII and Latin-1, but are present in Unicode, as characters U+2032 (dec. 8242) and U+2033 (dec. 8243), and as HTML entities ′ and ″. Double quotation marks are also often used to represent the ditto mark.

Straight single and double quotation marks are used in most programming languages to delimit strings or literal characters. In some languages (e. g. Pascal) only one type is allowed, in some (e. g. C and its derivatives) both are used with different meanings and in others (e. g. Python) both are used interchangeably. In some languages, if it is desired to include the same quotation marks used to delimit a string inside the string, the quotation marks are doubled. For example to represent the string eat 'hot' dogs in Pascal one uses 'eat ''hot'' dogs'. Other languages use an escape character, often the backslash, as in 'eat \'hot\' dogs'.

Typing quotation marks on a computer keyboard

Standard English computer keyboard layouts inherited the single and double “straight” quotation marks from the typewriter (the single quotation mark also doubling as an apostrophe), and they do not include individual keys for left-handed and right-handed typographic quotation marks. However, most computer text-editing programs provide a “smart quotes” feature (see below) to automatically convert “straight” quote marks into typographic punctuation. Generally, this “smart quote” feature is enabled by default. Some websites do not allow typographic quotation marks or apostrophes in posts (one such example being YouTube). One can skirt these limitations, however, by using the HTML character codes or entities.[15]

How to type quotation marks (and apostrophes) on a computer keyboard
  Macintosh key combinations Windows key combinations Linux (X) keys HTML entity HTML decimal
Single opening    Option + ] Alt + 0145 (on number pad) Compose < ' or Alt Gr + Shift + V &lsquo; &#8216;
Single closing (& apostrophe)    Option + Shift + ] Alt + 0146 (on number pad) Compose > ' or Alt Gr + Shift + B &rsquo; &#8217;
Double opening    Option + [ Alt + 0147 (on number pad) Compose < " or Alt Gr + V &ldquo; &#8220;
Double closing    Option + Shift + [ Alt + 0148 (on number pad) Compose > " or Alt Gr + B &rdquo; &#8221;

Smart quotes

To make typographic quotation marks easier to enter, publishing software often automatically converts typewriter quotation marks (and apostrophes) to typographic form during text entry (with or without the user being aware of it). This is known as the "smart quotes" feature. Quotation marks that are not automatically altered by computer programs are known as “dumb quotes”. Some implementations incorrectly produce an opening single quotation mark in places where an apostrophe is required, for example, in abbreviated years like ’08 for 2008.

Glyphs

History

In the first centuries of typesetting, quotations were distinguished merely by indicating the speaker, and this can still be seen in some editions of the Bible. During the Renaissance, quotations were distinguished by setting in a typeface contrasting with the main body text (often Italic type with roman, or the other way round). Long quotations were also set this way, at full size and full measure.[16]

Quotation marks were first cut in metal type during the middle of the sixteenth century, and were used copiously by some printers by the seventeenth. In some Baroque and Romantic-period books, they would be repeated at the beginning of every line of a long quotation. When this practice was abandoned, the empty margin remained, leaving the modern form of indented block quotation.[16]

In Early Modern English, quotation marks were used only to denote pithy comments. They first began to quote direct speech in 1714. By 1749 single quotation marks, or inverted commas, were commonly used to denote direct speech.[17]

See also

Notes

  1. Katherine Barber, editor (2004). The Canadian Oxford Dictionary, second edition. Toronto, Oxford University Press. ISBN 0-19-541816-6.
  2. Jeremiah 27:1-11; 29:1-28, 30-32; 34:1-5; and Ezekiel 1-36
  3. Stilman, Ann. Grammatically CORRECT, 1997. p. 181. ISBN 13: 978-089879-776-3.
  4. "The Chicago Manual of Style Online". http://www.chicagomanualofstyle.org/home.html. Retrieved 2007-11-08. 
  5. Butcher, J.; Drake, C.; Leach, M. (2006). Butcher's Copy-Editing: The Cambridge Handbook for Editors, Copy-Editors and Proofreaders (4th ed ed.). Cambridge, England: Cambridge University Press. 
  6. Style Manual: University of Minnesota
  7. Language Log: Dubious quotation marks
  8. 3.8—Quotation Marks
  9. Inkthinker: Why Quotation Marks Should “Not” Be Used for Emphasis
  10. The Associated Press Stylebook, p. 337; The Chicago Manual of Style, 15th edition 6.9, pp. 242–243; Strunk, William Jr., and White, E. B. The Elements of Style. Pearson Education Company, 4th edition, p. 36; The Globe and Mail Style Book. McFarlane and Warren Clements, 9th edition, p. 237; Brinck, Tom; Gergle, Darren; Wood, Scott D. Usability for the Web. Morgan Kaufmann, 2002, p. 277; Punctuation, The Chicago Manual of Style Online, accessed February 17, 2010.
  11. Ritter, R.M. New Hart’s Rules: The Handbook of Style for Writers and Editors. Oxford University Press, 2005, p. 155.
  12. Hyde, Grant Milnor. Handbook for Newspaper Workers. D. Appleton and company, 1921, p. 38.
  13. 13.0 13.1 13.2 Butcher's Copy-editing: The Cambridge Handbook for Editors, Copy-editors and Proofreaders. Cambridge University Press. 2006. pp. 273. 
  14. TJHSST
  15. See the WWW Consortium tables here.
  16. 16.0 16.1 Bringhurst (2002), p 86.
  17. Truss, Lynne. Eats, Shoots & Leaves, 2003. p. 151. ISBN 1-59240-087-6.

References

External links

This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.